* Fix security bug in WritableDirProvider.OpenOsWindow()
Reported by @NarryG and @nyeogmi
* Sandbox updates
* Update ImageSharp again
(cherry picked from commit 7d778248ee)
(cherry picked from commit f66cda74e95619ddba2221bda644bf4394619805)
(cherry picked from commit db8ba83866c523e08e4fba0b80cd954f4f190613)
Useful in some rare cases, mainly for grid-related activities.
Specifically:
- Audio entity where we never want it detached.
- FTL previs effects to show impending squish.
* Fix tooltips underflowing left side of screen
If the tooltip is so large it would clip the right side then it would underflow completely off-screen. This just clamps it instead.
* Better
* rubb
Fixed being able to position the cursor vertically if placeholder text was visible and multi-line. This is because the code was using line break info for the place holder. On top of not being correct behavior, this caused further exceptions since the cursor would get outside the editable text rope.
Fixed index exception if you try to move left in an empty text edit.
Has regression tests.
Fixes#4957, fixes#4953
* Add ability to add structured deny data to NetConnectingArgs.
Builds on the (horrifying) NetStructuredDisconnectMessages so that content can do more stuff.
To be used by SS14 to throttle people when they try to connect to a full server.
* Completely rewrite NetStructuredDisconnectMessages
So this class was a mess, and it was so bad it wasn't usable from content! System.Text.Json isn't sandbox safe (and I don't want to look into that right now), so the previous API surface of "pass the JsonNode around everywhere" just didn't work at all for content.
I decided the easiest solution would be to completely rewrite the entire thing to be a layer over a Dictionary<string, object> instead. This warranted a complete rewrite of the API, which should be fine as I doubt anybody was using it anyways.
Also, fully tested.
They tend to get cut off (or well did on wizden before pjb changed it to this exact value bigger along with another patch). Before you got around 2ish hours in a replay before it stopped. I doupt most servers will reach 6ish hours before this takes effect. But those servers can increase this value of needed.
- If scroll is not visible we don't handle it. This means nested containers don't interfere with their parents anymore.
- Fallback to Y-scrolling for H-scroll only containers.
Easiest way to repro is set a non-1.0 UIScale and open the main menu up, the logo will be fonky.
I checked the control dimensions and this aligned with my expectations.
* Add grid tile to Vector2 methods
Avoids me having to do it on content.
* Release note
* Engine
* Collapsible
* Add entitylookup methods for parent / map
Content's done it a bunch so make it reusable.
* Add MaxDimension property to Box2
Sometimes I want to pretend it's a circle radius.
* Add GetLocalPosition to controls
In my case I want the mouse's position inside of the control to show something under it unless there's a better way.
* Add global rectangles for controls
Like my other PR used to check if mouse is inbounds on the control without doing some skrunkly caching with mousemove.
* Add dotted line drawing to screen handle
Probably needs anti-aliasing but idk an easy way to do it.
* weh
* weh
* a
* weh
* weh
* Optimise ChunkEnumerator
It never unioned the AABB passed in with the grid's AABB so it might inadvertantly iterate a lot more dummy chunks than it needs to.
This helps speedup FindGridsIntersecting.
* weh
* Add DrawPrimitives overload for List<Vector2>
Storing ValueList in a field seems sussy so this is the next best thing.
* weh
* Bump pool size
* oop wrong method
* Add drawing methods for lists
Content may be using it over a valuelist for whatever reason.
* Add more ValueList conveniences
* Add more CollectionExtension methods
Maybe array.resize is bad for sandbox coin, in which case I'd also settle for changing it to a list instead.
* Add ToMapCoordinates method for NetCoordinates
* fr
* mraow
* Release notes
* Add support for automatically networking component dictionary fields with entity keys and values
* Fix using
* Fix order
* Add support for both key and value being entity uid
Fixes#4828
Asynchronous console command completions were just not being run on the server, the wrong function was being called. Hooray.
This caused sudo to break because it actually uses an async command completion (as other command completions it invokes might in turn be async).
* Optimise ChunkEnumerator
It never unioned the AABB passed in with the grid's AABB so it might inadvertantly iterate a lot more dummy chunks than it needs to.
This helps speedup FindGridsIntersecting.
* weh
* oop wrong method
* Update RELEASE-NOTES.md
* Source gen reorganizations + component unpause generator.
This commit (and subsequent commits) aims to clean up our Roslyn plugin (source gens + analyzers) stack to more sanely re-use common code
I also built a new source-gen that automatically generates unpausing implementations for components, incrementing attributed TimeSpan field when unpaused.
* Fix warnings in all Roslyn projects
This brings default ButtonGroup behavior back to before #4841.
The original comments in the code *did* clearly intend for the other behavior to be the default, but the code was blatantly bugged (whoops) so this didn't happen. Content relied on this A LOT and it's quite sane behavior regardless so just change the default back call it a day.
Breaks SS14 stylesheets due to not responding to style properties anymore.
At least one of those seems to be unfixable (ModulateSelf usage) which makes me think we should just deprecate ModulateSelf instead. However I'm not fixing that here.
* Add GetEncoding to sandbox (#4892)
Need this struct allowlisted to for nice unicode sanitization.
* Add UnicodeRanges too
* Changelog
---------
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
If the parent is somewhere below the transform hierarchy should still be okay, this just fixes where something getting pulled gets picked up as pulling doesn't seem to be handling this anymore.
* Added a test that checks that RobustIntegrationTest Client and Server do not end up with same sub-ComponentState reference objects.
* Un-ignore and adjust the test.
* review
---------
Co-authored-by: metalgearsloth <comedian_vs_clown@hotmail.com>
* Add entitylookup methods for parent / map
Content's done it a bunch so make it reusable.
* weh
---------
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
* Reapply "Fix replay int overflow issues." (#4802)
This reverts commit 32049e34f2.
* IConfigurationManager.LoadDefaultsFromTomlStream now does required type conversions.
This fixes scenarios like loading of `long` CVars.
This is the "total length" of the MIDI file, but it's not cached by FluidSynth and expensive to calculate.
This property was used in the render code (for local files only) and the instrument menu. Caching it drastically improves performance.
It makes no sense for our use case, and it caused FluidSynth to allocate a different thread pool *per* mixer. And every one of those threads have *high* priority. That's like *really* bad.
Furthermore, it was based on ParallelProcessCount which is currently bugged, and because of that we were always allocating 256 (!!!) real OS threads for a MIDI synthesizer. CHRIST. (fix for ParallelProcessCount is separate)
I assume this is responsible for a ton of people's MIDI lag, it just murdering their PC's CPU scheduler.
The ability to multithread FluidSynth still exists as a CVar but it'll default to 1 and I don't think it makes sense to ever change it.
Also there was code to dynamically change the parameter, as far as I could test this just always crashed the process so out it goes.
* Add MaxDimension property to Box2
Sometimes I want to pretend it's a circle radius.
* a
---------
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
* Add GetLocalPosition to controls
In my case I want the mouse's position inside of the control to show something under it unless there's a better way.
* weh
---------
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
* Add global rectangles for controls
Like my other PR used to check if mouse is inbounds on the control without doing some skrunkly caching with mousemove.
* weh
---------
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
* Entitylookup approx / shape changes
- Make the shape queries respect the approx flag.
- Make everything use shape queries.
- Hopefully reduce some of the internal cruft.
- Add some new methods I need for trade station.
* Bunch of deduplication
* Remove some more duplication abuse
* Remove intersection duplication
* Bunch more cleanup
* MapManager rejig
* Fix some stuff
* More fixes
* Release notes
* Fix TryFindGrid
* Sensor check
* Fix query
* Fix map queries
* More cleanup
* Fix whatever this is.
* also dis
* Fix entity query
* Smol optimisations
* Also this
* Clear entities seen by a session when the full update is requested
* Disable PVS budged for the full update
It helps preventing weird intermediate states when a client observes
themselves in a void with all the alert notifications going wild.
However it introduces a spike on CPU and networking.
* Add changelog line
* Move the changelog line to the proper place
* Update RELEASE-NOTES.md
* Revert "Disable PVS budged for the full update"
This reverts commit 6976ca04b8.
* Update RELEASE-NOTES.md
---------
Co-authored-by: metalgearsloth <31366439+metalgearsloth@users.noreply.github.com>
* Isolate net messages in integration tests.
Integration tests don't use Lidgren to connect client and send, instead they just use some in-process channels to communicate. Because of this, the original implementation of net messages *directly* passed the net message instances between client and server instances. This caused issues whenever content would mutate data in a NetMessage after it "passed through".
Now we run the messages through WriteToBuffer() and ReadFromBuffer() so they pass through binary serialization. This means there's no more implicit sharing of the objects.
Note that this requires some trickery: Lidgren's message types have internal constructors. Really ideally we'd change the engine to make this more testable... but that's a content breaking change. Instead I just added InternalsVisibleTo to Lidgren so we can mess with it. We maintain the library ourselves anyways I can do what I want.
Fixes#4836
* Register Robust.UnitTesting as assembly for reflection.
This is necessary so that serialized types in the assembly can be picked up by NetSerializer.
Have to disable automatic reflection on all entity systems/components that tests register manually right now, because otherwise tests break.
* Stop shallow cloning specific net messages in integration tests.
This isn't necessary anymore now that we have a thorough fix.
* Wow I really forgot to copy-paste that line to the other side huh.
* Add test that serializer hash matches.
* Another test one I missed earlier.
* Changelog
* Entitylookup tweaks
- Removed a dupe internal method.
- Removed some dupe internal code.
- Renamed some methods in line with local vs non-local.
* Update release
* Also this
* Add support for forcing prototypes in a file or directory to be parsed as abstract
* Simplify mapping add abstract true call
* Fix docs
* Address reviews
* Move to Central Package Management.
Allows us to store NuGet package versions all in one place. Yay!
* Update NuGet packages and fix code for changes.
Notable:
Changes to ILVerify.
Npgsql doesn't need hacks for inet anymore, now we need hacks to make the old code work with this new reality.
NUnit's analyzers are already complaining and I didn't even update it to 4.x yet.
TerraFX changed to GetLastSystemError so error handling had to be changed.
Buncha APIs have more NRT annotations.
* Remove dotnet-eng NuGet package source.
I genuinely don't know what this was for, and Central Package Management starts throwing warnings about it, so YEET.
* Fix double loading of assemblies due to ALC shenanigans.
Due to how the "sideloading" code for the ModLoader was set up, it would first try to load Microsoft.Extensions.Primitives from next to the content dll. But we already have that library in Robust!
Chaos ensues.
We now try to forcibly prioritize loading from the default ALC first to avoid this.
* Remove Robust.Physics project.
Never used.
* Remove erroneous NVorbis reference.
Should be VorbisPizza and otherwise wasn't used.
* Sandbox fixes
* Remove unused unit test package references.
Castle.Core and NUnit.ConsoleRunner.
* Update NUnit to 4.0.1
This requires replacing all the old assertion methods because they removed them 🥲
* Mute CA1416 (platform check) errors
TerraFX started annotating APIs with this and I can't be arsed to entertain this analyzer so out it goes.
* Fine ya cranky, no more CPM for Robust.Client.Injectors
* Changelog
* Oh so that's what dotnet-eng was used for. Yeah ok that makes sense.
* Central package management for remaining 2 robust projects
* Ok that was a bad idea let's just use NUnit 3 on the analyzer test project
* Oh right forgot to remove this one
* Update to a newer version of RemoteExecutor
* Disable RemoteExecutor test
https://github.com/dotnet/arcade/issues/8483 Yeah this package is not well maintained and clearly we can't rely on it.
* Fix immutable list serialization
* Extension helper function for registering BUI events filtered to UI key.
Usages of events like BoundUIClosedEvent frequently did not check the UI key or do it improperly. This has, and will continue to cause, bugs.
The new helper (accessible as Subs.BuiEvents() from an entity system) makes it easy to subscribe to BUI events while also filtering to the correct UI key.
Also added missing SubscribeLocalEvent overloads with new handler types to EntitySystem.Subscriptions.
* Sprinkle [ViewVariables] around BUI
* Avoid buggy behavior if a Bound UI is closed inside the `BoundUIOpenedEvent` that's opening it.
* Add random pick / take methods for sets
I want it don't at me.
* cleanup (mraow)
* Revert "cleanup (mraow)"
This reverts commit e279957f21.
* flatpak
* notes
Happens if you just type "tp:to<space>" into the console.
Toolshed can fail to provide completion results, in which case a null propagates and possibly crashes the server.
IPostInjectInit does not run through IoCManager.InjectDependencies(). This meant the logger was not initialized, and loading failures in the console history would crash the client startup due to an NRE while trying to log a warning.
See https://github.com/space-wizards/space-station-14/issues/23624
* Make component factory use frozen collections
* Fix integration tests
* Also freeze _entTraitDict
* A
* I love integration test setup logic
* Re-add public method
* Freeze event bus
* Remove per-component dictionary lookup on EntAddComponent
* release notes + fix test jank
* Fix merge
* fix tests
* Shutdown
* Remove physics sleep cancelling
Was a bad idea, in the future I'm going to add even more asserts around this but for now I can fix content.
* Fix this
* Make component factory use frozen collections
* Fix integration tests
* Also freeze _entTraitDict
* A
* I love integration test setup logic
* Re-add public method
* changes
* Better notes
* And the new method
* Fix notes
* Fix GetEntitiesIntersecting for maps
Still valid to call it in this way. Also added the collections versions because muh allocs.
* Add local ones too
This causes tons of problems with OpenDream's small popup windows, and even for SS14 it doesn't make much sense.
The behavior can be re-enabled per window by setting WindowRoot.DisableAutoScaling to false.
This is Hybrid ACZ (Content.Client.zip in server package) but with the ability to add extra files on top (OpenDream rsc)
Also added IStatusHost.InvalidateAcz().
* Fix SetAwake()
* Remove bad debug assert
* EntityQuery & misc optimizations
* Remove bad(?) code, and add new test
* I love engine tests
* Add debug assert
* Don't defer grid traversals
Transform is in a slightly better state so we can remove this hacky thing.
It got to the point it was doing a bunch of unnecessary checks (no need to check container if you're just checking map / grid parent assuming no map / grid has containers).
The main concern now is: Does not deferring cause any issues, which it doesn't seem to (previously this mostly happened with transform state handling). On server-side the main worry is broadphasesystem seeing as this is being run manually to check for entities entering grids.
* Comment cleanup
* Obsolete MoveEvent .FromStateHandling
* Faster map position calculation
* Check Xform.GridUid instead of checking for `MapGridComponent`
---------
Co-authored-by: ElectroJr <leonsfriedrich@gmail.com>
Replays now use a dedicated thread (rather than thread pool) for write operations.
Moved batch operations to this thread as well. They were previously happening during PVS. Looking at some trace files these compression ops can easily take 5+ ms in some cases, so moving them somewhere else is appreciated.
Added EventSource instrumentation for PVS and replay recording.
* Save work.
* three billion tweaks
* Rune-aware parser.
* a
* all shedded out for the night
* a
* oogh
* Publicizes a lot of common generic commands, so custom toolshed envs can include them.
* Implement parsing for all number types.
* i think i might implode
* a
* Tests.
* a
* Enum parser test.
* do u like parsers
* oopls
* ug fixes
* Toolshed is approaching a non-insignificant part of the engine's size.
* Pool toolshed's tests, also type tests.
* bwa
* tests pass :yay:
* Update Robust.Shared/CVars.cs
Co-authored-by: DrSmugleaf <DrSmugleaf@users.noreply.github.com>
* how did this not fail tests
* awa
* many levels of silly
---------
Co-authored-by: moonheart08 <moonheart08@users.noreply.github.com>
Co-authored-by: DrSmugleaf <DrSmugleaf@users.noreply.github.com>
* Saving work
* Move shit to engine
* lord
* merg
* awa
* bql is kill
* forgot the fucking bike rack
* bql is kill for real
* pjb will kill me
* aughfhbdj
* yo ho here we go on my way to the MINES
* a
* adgddf
* gdsgvfvxshngfgh
* b
* hfsjhghj
* hbfdjjh
* tf you mean i have to document it
* follow C# standards
* Assorted cleanup and documentation pass, minor bugfix in ValueRefParser.
* Start porting old commands, remove that pesky prefix in favor of integrating with the shell.
* Fix valueref up a bit, improve autocomplete for it.
* e
* Toolshed type system adventure.
* a log
* a
* a e i o u
* awa
* fix tests
* Arithmetic commands.
* a
* parse improvements
---------
Co-authored-by: moonheart08 <moonheart08@users.noreply.github.com>
All HttpClient usages in the engine now use Happy Eyeballs, same implementation as the launcher.
Makes a IHttpClientHolder type so content can profit from this technology too. Didn't make use of this in all HttpClient usages in the engine itself, due to varying circumstances making it annoying to refactor.
This can happen if we're out of audio streams. Before, we just kinda pretended like everything was OK, which easily caused crash bugs in e.g. MIDI.
Ideally the audio engine would be less terrible and this could be handled better than "throw new Exception()", but I'm fixing a stack overflow here alright?
* Add ISawmill.Verbose log helpers
* Verbose logs for server-side networking handshake.
* Replays: final boss
It does zippies now. It fucking works. Amazingly, in fact.
* Add ZipArchive to sandbox
`ResPath.RelativeTo()` now considers non-rooted paths relative to `.`
This fixes some things like `MemoryContentRoot`'s `FindFiles()` implementation.
Fix `IContentRoot.GetEntries()` default implementation (used by all content roots except `DirLoader`) not working at all.
Made `ResourceManager.ContentGetDirectoryEntries()` report content root mount paths as directories.
Added tests for all of the above.
* Debug connection screen
* [ContentAccessAllowed] so I can use IStateManager on engine types.
* Implement a default engine stylesheet.
* awa
* Fix an issue that can cause hangs when resolving a color.
---------
Co-authored-by: moonheart08 <moonheart08@users.noreply.github.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers+git@gmail.com>
Robust.Client.WebView includes Robust.Client.dll and such now, so sandboxing was loading the Robust.Client.dll from there instead of from the running engine itself.
* dog what am i doing
* finish gen source part from class symbol
* we are dangerously close to things happening
* generation fixes
* oh? on god?
* stop autogenerating the attribute for no reason + diagnostics
* testing diagnostics
* proper type name handling + clonedata bool
* thank you material storage for making me realize this
* forgot to commit
* p
* fixes for afterautohandlestate
* make it work with access
This might be a maint thing but look, I just want seeded RNG and IRobustRandom doesn't have it so not sure what is easier considering IRobustRandom is also registered as a depdency but constructing it manually is weird aaaa
Re-organize initialization so that User-Agent CVar actually works.
Add web.headless CVar to not load CEF even on graphical client.
Clean up init logic to not rely on static IoC, and clean up loggers used too.
Previously there was no easy way of passing matrices onto shaders, with the current setup.
Now, matrices can be defined for the shader in the same way that vectors can, as a series of numbers parsed as floats.
The previous logic used SDL_GetDisplayDPI. This is a broken API however that doesn't return consistent results between platforms. On Windows it returns the configured scale DPI value, on other platforms it returns the actual raw monitor DPI.
The new code is what you should do, namely dividing window size with size in pixels.
Implement MarkupTagManager for getting markup tags
Implement IMarkupTag interface
Implement markup node classes
Prepare switching out FormattedMessage with new implementations
We now check the list of CVars to see if there's any unregistered CVars specified (i.e. in config, but not actually registered by the code). This would probably indicate a typo.
Only doing this on the server for now. The client may share config files from multiple codebases and end up with unknown CVars from there. This is probably fine, since those would be applied more automatically and not prone to config file typos as much.
I circled back around to this and discovered that the fix is (probably?) easy.
Closes#3079
I tested this locally but I'm pushing the change via the web editor so I don't have to go to the trouble of setting up a Robust fork of my own.
Engine and content locales get merged into the same folder. This is causing two files named the same thing to be in the same place, presumably causing extracting the build to fail? Hopefully?
* UIControllerManager
Implemented UI Controller Manager
* added fetch function
* added note
* Hiding some internal stuff
* Implemented event on gamestate switch for ui
* Fix serialization field assigner emit
* fixing issues with ILEmitter stuff
* AHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH
Blame Smug
* fixing nullref
* Add checking for no backing field / property for ui system dependencies
* fixes Gamestate detection
* Implemented event on UIControllers on system load
* Updated systemload/unload listeners
* Had this backwards lol
* Fix nulling systems before calling OnSystemUnloaded, broke InventoryUIController.Hands.cs
* Created UI Window management system
- A manager that allows for easy creation and access of popup or gamestate windows
* Changing to use basewindow instead of default window
* Implemented UI Theming that isn't ass
* Updated default theme loading and validation
* Added path validation for themes
* Implemented UI Themes
* Implemented UI Theme prototypes
* Implementing theming for texture buttons and Texturerects
* fixing server error
* Remove IUILink
* Implemented default theme overriding and theme colors
* Fixing sandbox lul
* Added error for not finding UITheme
* fixing setting default theme in content
* Move entity and tile spawn window logic to controllers
* Add 2 TODOs
* Merge fixes
* Add IOnStateChanged for UI controllers
* Fix inventory window being slow to open
Caches resources when the UI theme is changed
* Remove caching on theme change
The real fix was fixing the path for resources
* Remove test method
* Fix crash when controllers implement non generic interfaces
* Add controllers frame update
* Split UserInterfaceManager into partials
- Created UI screen
* Converted more UI managers into partials
* Setup UIScreen manager system
* Added some widget utility funcs
updated adding widgets
* Started removing HUDManager
* Moved UiController Manager to Partials
Finished moving all UIController code to UIManager
* Fixed screen loading
* Fixed Screen scaling
* Fixed Screen scaling
cleanup
* wat
* IwantToDie
* Fixed resolving ResourceCache instead of IResourceCache
* Split IOnStateChanged into IOnStateEntered and IOnStateExited
* Implemented helpers for adjusting UIAutoscale for screens
* Fixed autoscale, removed archiving from autoscale
* Implemented popups and adjusted some stuff
* Fixing some popup related shinanegans
* Fixing some draw order issues
* fixing dumb shit
* Fix indentation in UserInterfaceManager.Input.cs
* Moved screen setup to post init (run after content)
* Fix updating theme
* Merge fixes
* Fix resolving sprite system on control creation
* Fix min size of tile spawn window
* Add UIController.Initialize method
* https://tenor.com/view/minor-spelling-mistake-gif-21179057
* Add doc comment to UIController
* Split UIController.cs and UISystemDependency.cs into their own files
* Add more documentation to ui controllers
* Add AttributeUsage to UISystemDependencyAttribute
* Fix method naming
* Add documentation for assigners
* Return casted widgets where relevant
* Fix entity spawner scroll (#1)
* Add CloseOnClick and CloseOnEscape for popups
* Remove named windows and popups
* Cleanup controller code
* Add IOnStateChanged, IOnSystemChanged, IOnSystemLoaded, IOnSystemUnloaded
* Add more docs to state and system change interfaces
* Fixing Window issues
* Fixing some window fuckery
* Added OnOpen event to windows, updated sandbox window
Sandbox windows now persist values and positions
* Recurse through controls to register widgets (#2)
* Allow path to be folder
* Fix local player shutdown
* Fixing escape menu
* Fix backing field in DataDefinition.Emitters
* Ent+Tile spawn no crash
* Skip no-spawn in entity spawn menu
Co-authored-by: Jezithyr <jmaster9999@gmail.com>
Co-authored-by: DrSmugleaf <DrSmugleaf@users.noreply.github.com>
Co-authored-by: Jezithyr <Jezithyr@gmail.com>
Co-authored-by: wrexbe <81056464+wrexbe@users.noreply.github.com>
Co-authored-by: Flipp Syder <76629141+vulppine@users.noreply.github.com>
Co-authored-by: wrexbe <wrexbe@protonmail.com>
* adds includedatafields to serv3
* fixes some stuff and adds tests
* checks for circular include
* fix writing
* this one should fix it frfrf
* ok now this one is gonna be it i swear
* we can save a few operations here
* goofy string
Co-authored-by: Paul <ritter.paul1@gmail.com>
MsgMapStrServerHandshake was being sent as unordered, meaning that it could actually arrive on the client before the handshake-finished messages. Whoops.
* Dirty PVS chunk when visibility mask changes
* fix tests?
* aaaaaa
* maybe sorta finally fix tests
* directly return vis mask,
Also defaults to 1 only if visibility component does not exist.
* make sure everything has first bit set
* Don't disable access check outside FULL_RELEASE.
* Content allows all commands on +HOST now
* Client-side completions are filtered for perms and sorted.
This was an existing bug, but due to me moving more cleanup logic to game thread shutdown the window of opportunity for it to trigger just got much greater.
* Trying to get res:// and usr:// cookies to wrok
* Update CefGlue
* Bump CEF
* Seal types in WebView
Fixes warnings
* Move most of client cleanup to game thread.
This used to run in the windowing thread which broke CEF shutdown, most notably cookie saving.
* "flushcookies" command for CEF.
* Remove unecessary res:// code.
* Fix tests
* More request handler fixes.
* Good thing I don't have to care about commit quality in PRs like this.
* Cleave the ACZ code into two parts
* SSAZip - faster-performing than ZipArchive, very small codebase
* OnDemandFile to reduce RAM usage of SSAZip
* Modify OnDemandFile to be more amiable for replacing parts of ACManifest
* Make the ACZ Manifest code a lot less reliant on an "internal zip file" for memory usage reasons
* Finally allow disabling legacy client zip creation entirely
* ZIP is now only an ingestion format for ACZ, not actually served anymore
* We do a little renaming
* We do a little namespace adjustment
* We do a little ABOMINATION OF FILE MERGING
* Significantly optimise prediction resetting
Turns out just tracking dirty entities and not iterating 30k is much faster.
* cleaner
* Slightly better again
* review
* Fix
* boop
* rebiew
* A
This was like 1/3 of the frame spikes from PVS pop-in. The main benefit is just checking if the entity is anchored for grid traversal and the secondary was earlying-out handling component state if it's sent to nullspace.
* benchmark script
* more changes
* oopsie
* adjust workflow
* Put a concurrency limit on the benchmarks action
* Update run_benchmarks.py
Co-authored-by: Paul <ritter.paul1+git@googlemail.com>
Co-authored-by: Pieter-Jan Briers <pieterjan.briers@gmail.com>
* RobustToolbox side of Redial API.
Please be aware that as far as I know testing this code is nigh-impossible until it ships.
* a smidge of paranoia
* paranoia on the paranoia please
* DetachParentToNull tweaks
The other parent change message already has the mapid and gridid updated when issuing the event.
We'll also guard the event by checking if they're already in nullspace.
* woops
It now includes the invalid hexcode argument.
Something in content kept getting these exceptions on prod and knowing the invalid argument would be very helpful when debugging these in the future.
@@ -18,7 +18,7 @@ We are happy to accept contributions from anybody. Get in Discord or IRC if you
## Building
This repository is the **engine** part of SS14. It's the base engine all SS14 servers will be built on. As such, it does not start on its own: it needs the [content repo](https://github.com/space-wizards/space-station-14). Think of Robust Toolbox as BYOND in the context of Spacestation 13.
This repository is the **engine** part of SS14. It's the base engine all SS14 servers will be built on. As such, it does not start on its own: it needs the [content repo](https://github.com/space-wizards/space-station-14). Think of Robust Toolbox as BYOND in the context of Space Station 13.
# Loc strings for various entity state & client-side PVS related commands
cmd-reset-ent-help = Usage: resetent <Entity UID>
cmd-reset-ent-desc = Reset an entity to the most recently received server state. This will also reset entities that have been detached to null-space.
cmd-reset-all-ents-help = Usage: resetallents
cmd-reset-all-ents-desc = Resets all entities to the most recently received server state. This only impacts entities that have not been detached to null-space.
cmd-local-delete-desc = Deletes an entity. Unlike the normal delete command, this is CLIENT-SIDE. Unless the entity is a client-side entity, this will likely cause errors.
cmd-full-state-reset-help = Usage: fullstatereset
cmd-full-state-reset-desc = Discards any entity state information and requests a full-state from the server.
cmd-invalid-arg-number-error = Invalid number of arguments.
cmd-parse-failure-integer = {$arg} is not a valid integer.
cmd-parse-failure-float = {$arg} is not a valid float.
cmd-parse-failure-bool = {$arg} is not a valid bool.
cmd-parse-failure-uid = {$arg} is not a valid entity UID.
cmd-parse-failure-mapid = {$arg} is not a valid MapId.
cmd-parse-failure-grid = {$arg} is not a valid grid.
cmd-parse-failure-entity-exist = UID {$arg} does not correspond to an existing entity.
cmd-error-file-not-found = Could not find file: {$file}.
cmd-error-dir-not-found = Could not find directory: {$dir}.
cmd-failure-no-attached-entity = There is no entity attached to this shell.
## 'help' command
cmd-help-desc = Display general help or help text for a specific command
cmd-help-help = Usage: help [command name]
When no command name is provided, displays general-purpose help text. If a command name is provided, displays help text for that command.
cmd-help-no-args = To display help for a specific command, write 'help <command>'. To list all available commands, write 'list'. To search for commands, use 'list <filter>'.
cmd-help-unknown = Unknown command: { $command }
cmd-help-top = { $command } - { $description }
cmd-help-invalid-args = Invalid amount of arguments.
cmd-help-arg-cmdname = [command name]
## 'cvar' command
cmd-cvar-desc = Gets or sets a CVar.
cmd-cvar-help = Usage: cvar <name | ?> [value]
If a value is passed, the value is parsed and stored as the new value of the CVar.
If not, the current value of the CVar is displayed.
Use 'cvar ?' to get a list of all registered CVars.
cmd-cvar-invalid-args = Must provide exactly one or two arguments.
cmd-cvar-not-registered = CVar '{ $cvar }' is not registered. Use 'cvar ?' to get a list of all registered CVars.
cmd-cvar-parse-error = Input value is in incorrect format for type { $type }
cmd-cvar-compl-list = List available CVars
cmd-cvar-arg-name = <name | ?>
cmd-cvar-value-hidden = <value hidden>
## 'list' command
cmd-list-desc = Lists available commands, with optional search filter
cmd-list-help = Usage: list [filter]
Lists all available commands. If an argument is provided, it will be used to filter commands by name.
cmd-list-heading = SIDE NAME DESC{"\u000A"}-------------------------{"\u000A"}
Executes a command on the server. This is necessary if a command with the same name exists on the client, as simply running the command would run the client command first.
## 'gc' command
cmd-gc-desc = Run the GC (Garbage Collector)
cmd-gc-help = Usage: gc [generation]
Uses GC.Collect() to execute the Garbage Collector.
If an argument is provided, it is parsed as a GC generation number and GC.Collect(int) is used.
Use the 'gfc' command to do an LOH-compacting full GC.
cmd-gc-failed-parse = Failed to parse argument.
cmd-gc-arg-generation = [generation]
## 'gcf' command
cmd-gcf-desc = Run the GC, fully, compacting LOH and everything.
cmd-gcf-help = Usage: gcf
Does a full GC.Collect(2, GCCollectionMode.Forced, true, true) while also compacting LOH.
This will probably lock up for hundreds of milliseconds, be warned.
## 'gc_mode' command
cmd-gc_mode-desc = Change/Read the GC Latency mode
cmd-gc_mode-help = Usage: gc_mode [type]
If no argument is provided, returns the current GC latency mode.
If an argument is passed, it is parsed as GCLatencyMode and set as the GC latency mode.
cmd-gc_mode-current = current gc latency mode: { $prevMode }
Teleport the given entities to some target entity.
command-description-player-list =
Returns a list of all player sessions.
command-description-player-self =
Returns the current player session.
command-description-player-imm =
Returns the session associated with the player given as argument.
command-description-player-entity =
Returns the entities of the input sessions.
command-description-self =
Returns the current attached entity.
command-description-physics-velocity =
Returns the velocity of the input entities.
command-description-physics-angular-velocity =
Returns the angular velocity of the input entities.
command-description-buildinfo =
Provides information about the build of the game.
command-description-cmd-list =
Returns a list of all commands, for this side.
command-description-explain =
Explains the given expression, providing command descriptions and signatures.
command-description-search =
Searches through the input for the provided value.
command-description-stopwatch =
Measures the execution time of the given expression.
command-description-types-consumers =
Provides all commands that can consume the given type.
command-description-types-tree =
Debug tool to return all types the command interpreter can downcast the input to.
command-description-types-gettype =
Returns the type of the input.
command-description-types-fullname =
Returns the full name of the input type according to CoreCLR.
command-description-as =
Casts the input to the given type.
Effectively a type hint if you know the type but the interpreter does not.
command-description-count =
Counts the amount of entries in it's input, returning an integer.
command-description-map =
Maps the input over the given block, with the provided expected return type.
This command may be modified to not need an explicit return type in the future.
command-description-select =
Selects N objects or N% of objects from the input.
One can additionally invert this command with not to make it select everything except N objects instead.
command-description-comp =
Returns the given component from the input entities, discarding entities without that component.
command-description-delete =
Deletes the input entities.
command-description-ent =
Returns the provided entity ID.
command-description-entities =
Returns all entities on the server.
command-description-paused =
Filters the input entities by whether or not they are paused.
This command can be inverted with not.
command-description-with =
Filters the input entities by whether or not they have the given component.
This command can be inverted with not.
command-description-fuck =
Throws an exception.
command-description-ecscomp-listty =
Lists every type of component registered.
command-description-cd =
Changes the session's current directory to the given relative or absolute path.
command-description-ls-here =
Lists the contents of the current directory.
command-description-ls-in =
Lists the contents of the given relative or absolute path.
command-description-methods-get =
Returns all methods associated with the input type.
command-description-methods-overrides =
Returns all methods overridden on the input type.
command-description-methods-overridesfrom =
Returns all methods overridden from the given type on the input type.
command-description-cmd-moo =
Asks the important questions.
command-description-cmd-descloc =
Returns the localization string for a command's description.
command-description-cmd-getshim =
Returns a command's execution shim.
command-description-help =
Provides a quick rundown of how to use toolshed.
command-description-ioc-registered =
Returns all the types registered with IoCManager on the current thread (usually the game thread)
command-description-ioc-get =
Gets an instance of an IoC registration.
command-description-loc-tryloc =
Tries to get a localization string, returning null if unable.
command-description-loc-loc =
Gets a localization string, returning the unlocalized string if unable.
command-description-physics-angular_velocity =
Returns the angular velocity of the given entities.
command-description-vars =
Provides a list of all variables set in this session.
command-description-any =
Returns true if there's any values in the input, otherwise false.
command-description-ArrowCommand =
Assigns the input to a variable.
command-description-isempty =
Returns true if the input is empty, otherwise false.
command-description-isnull =
Returns true if the input is null, otherwise false.
command-description-unique =
Filters the input sequence for uniqueness, removing duplicate values.
command-description-where =
Given some input sequence IEnumerable<T>, takes a block of signature T -> bool that decides if each input value should be included in the output sequence.
command-description-do =
Backwards compatibility with BQL, applies the given old commands over the input sequence.
command-description-named =
Filters the input entities by their name, with the regex ^selector$.
command-description-prototyped =
Filters the input entities by their prototype.
command-description-nearby =
Creates a new list of all entities nearby the inputs within the given range.
command-description-first =
Returns the first entry of the given enumerable.
command-description-splat =
"Splats" a block, value, or variable, creating N copies of it in a list.
command-description-val =
Casts the given value, block, or variable to the given type. This is mostly a workaround for current limitations of variables.
command-description-actor-controlled =
Filters entities by whether or not they're actively controlled.
command-description-actor-session =
Returns the sessions associated with the input entities.
command-description-physics-parent =
Returns the parent(s) of the input entities.
command-description-emplace =
Runs the given block over it's inputs, with the input value placed into the variable $value within the block.
Additionally breaks out $wx, $wy, $proto, $desc, $name, and $paused for entities.
Can also have breakout values for other types, consult the documentation for that type for further info.
command-description-AddCommand =
Performs numeric addition.
command-description-SubtractCommand =
Performs numeric subtraction.
command-description-MultiplyCommand =
Performs numeric multiplication.
command-description-DivideCommand =
Performs numeric division.
command-description-min =
Returns the minimum of two values.
command-description-max =
Returns the maximum of two values.
command-description-BitAndCommand =
Performs bitwise AND.
command-description-BitOrCommand =
Performs bitwise OR.
command-description-BitXorCommand =
Performs bitwise XOR.
command-description-neg =
Negates the input.
command-description-GreaterThanCommand =
Performs a greater-than comparison, x > y.
command-description-LessThanCommand =
Performs a less-than comparison, x < y.
command-description-GreaterThanOrEqualCommand =
Performs a greater-than-or-equal comparison, x >= y.
command-description-LessThanOrEqualCommand =
Performs a less-than-or-equal comparison, x <= y.
command-description-EqualCommand =
Performs an equality comparison, returning true if the inputs are equal.
command-description-NotEqualCommand =
Performs an equality comparison, returning true if the inputs are not equal.
command-description-append =
Appends a value to the input enumerable.
command-description-DefaultIfNullCommand =
Replaces the input with the type's default value if it is null, albeit only for value types (not objects).
command-description-OrValueCommand =
If the input is null, uses the provided alternate value.
command-description-DebugPrintCommand =
Prints the given value transparently, for debug prints in a command run.
command-description-i =
Integer constant.
command-description-f =
Float constant.
command-description-s =
String constant.
command-description-b =
Bool constant.
command-description-join =
Joins two sequences together into one sequence.
command-description-reduce =
Given a block to use as a reducer, turns a sequence into a single value.
The left hand side of the block is implied, and the right hand is stored in $value.
command-description-rep =
Repeats the input value N times to form a sequence.
command-description-take =
Takes N values from the input sequence
command-description-spawn-at =
Spawns an entity at the given coordinates.
command-description-spawn-on =
Spawns an entity on the given entity, at it's coordinates.
command-description-spawn-attached =
Spawns an entity attached to the given entity, at (0 0) relative to it.
command-description-mappos =
Returns an entity's coordinates relative to it's current map.
command-description-pos =
Returns an entity's coordinates.
command-description-tp-coords =
Teleports the target to the given coordinates.
command-description-tp-to =
Teleports the target to the given other entity.
command-description-tp-into =
Teleports the target "into" the given other entity, attaching it at (0 0) relative to it.
command-description-comp-get =
Gets the given component from the given entity.
command-description-comp-add =
Adds the given component to the given entity.
command-description-comp-ensure =
Ensures the given entity has the given component.
command-description-comp-has =
Check if the given entity has the given component.
command-description-AddVecCommand =
Adds a scalar (single value) to every element in the input.
command-description-SubVecCommand =
Subtracts a scalar (single value) from every element in the input.
command-description-MulVecCommand =
Multiplies a scalar (single value) by every element in the input.
command-description-DivVecCommand =
Divides every element in the input by a scalar (single value).
command-description-rng-to =
Returns a number from its input to its argument (i.e. n..m inclusive)
command-description-rng-from =
Returns a number to its input from its argument (i.e. m..n inclusive)
command-description-rng-prob =
Returns a boolean based on the input probability/chance (from 0 to 1)
command-description-sum =
Computes the sum of the input.
command-description-bin =
"Bins" the input, counting up how many times each unique element occurs.
command-description-extremes =
Returns the two extreme ends of a list, interwoven.
command-description-sortby =
Sorts the input least to greatest by the computed key.
command-description-sortmapby =
Sorts the input least to greatest by the computed key, replacing the value with it's computed key afterward.
command-description-sort =
Sorts the input least to greatest.
command-description-sortdownby =
Sorts the input greatest to least by the computed key.
command-description-sortmapdownby =
Sorts the input greatest to least by the computed key, replacing the value with it's computed key afterward.
command-description-sortdown =
Sorts the input greatest to least.
command-description-iota =
Returns a list of numbers 1 to N.
command-description-to =
Returns a list of numbers N to M.
command-description-curtick =
The current game tick.
command-description-curtime =
The current game time (a TimeSpan)
command-description-realtime =
The current realtime since startup (a TimeSpan)
command-description-servertime =
The current server game time, or zero if we are the server (a TimeSpan)
command-description-replace =
Replaces the input entities with the given prototype, preserving position and rotation (but nothing else)
# Strings Loc para vários comandos relacionados ao estado da entidade e ao PVS do lado do cliente
cmd-reset-ent-help = Uso: resetent <Entity UID>
cmd-reset-ent-desc = Redefina uma entidade para o estado do servidor recebido mais recentemente. Isso também redefinirá as entidades que foram desanexadas para espaço nulo.
cmd-reset-all-ents-help = Uso: resetallents
cmd-reset-all-ents-desc = Redefine todas as entidades para o estado do servidor recebido mais recentemente. Isso afeta apenas as entidades que não foram desanexadas ao espaço nulo.
cmd-detach-ent-help = Uso: detachent <Entity UID>
cmd-detach-ent-desc = Desanexar uma entidade para espaço nulo, como se tivesse saído do intervalo PVS.
cmd-local-delete-desc = Exclui uma entidade. Ao contrário do comando delete normal, este é CLIENT-SIDE. A menos que a entidade seja uma entidade do lado do cliente, isso provavelmente causará erros.
cmd-full-state-reset-help = Uso: fullstatereset
cmd-full-state-reset-desc = Descarta qualquer informação de estado da entidade e solicita um estado completo do servidor.
cmd-invalid-arg-number-error = Número inválido de argumentos.
cmd-parse-failure-integer = {$arg} não é um inteiro válido.
cmd-parse-failure-float = {$arg} não é um float válido.
cmd-parse-failure-bool = {$arg} não é um booleano válido.
cmd-parse-failure-uid = {$arg} não é um UID de entidade válido.
cmd-parse-failure-entity-exist = UID {$arg} não corresponde a uma entidade existente.
## 'help' command
cmd-help-desc = Exibir ajuda geral ou texto de ajuda para um comando específico
cmd-help-help = Uso: help [command name]
Quando nenhum nome de comando é fornecido, exibe o texto de ajuda geral. Se um nome de comando for fornecido, exibe o texto de ajuda para esse comando.
cmd-help-no-args = Para exibir a ajuda de um comando específico, escreva 'help <command>'. Para listar todos os comandos disponíveis, escreva 'list'. Para procurar comandos, use 'list <filter>'.
Executa um comando no servidor. Isso é necessário se um comando com o mesmo nome existir no cliente, pois a simples execução do comando executaria o comando do cliente primeiro.
## 'gc' command
cmd-gc-desc = Execute o GC (coletor de lixo)
cmd-gc-help = Uso: gc [generation]
Usa GC.Collect() para executar o Garbage Collector.
Se um argumento for fornecido, ele será analisado como um número de geração do GC e GC.Collect(int) será usado.
Use o comando 'gfc' para fazer um GC completo compactando LOH.
cmd-gc-failed-parse = Falha ao analisar o argumento.
cmd-gc-arg-generation = [generation]
## 'gcf' command
cmd-gcf-desc = Execute o GC, totalmente, compactando LOH e tudo.
cmd-gcf-help = Uso: gcf
Faz um GC.Collect(2, GCCollectionMode.Forced, true, true) completo enquanto também compacta LOH.
Isso provavelmente será bloqueado por centenas de milissegundos, esteja avisado.
## 'gc_mode' command
cmd-gc_mode-desc = Alterar/ler o modo de latência do GC
cmd-gc_mode-help = Uso: gc_mode [type]
Se nenhum argumento for fornecido, retornará o modo de latência do GC atual.
Se um argumento for passado, ele será analisado como GCLatencyMode e definido como o modo de latência do GC.
cmd-gc_mode-current = modo de latência atual do gc: { $prevMode }
cmd-gc_mode-possible = modos possíveis:
cmd-gc_mode-option = - { $mode }
cmd-gc_mode-unknown = modo de latência gc desconhecido: { $arg }
cmd-gc_mode-attempt = tentando alterar o modo de latência do gc: { $prevMode } -> { $mode }
cmd-gc_mode-result = modo de latência gc resultante: { $mode }
cmd-gc_mode-arg-type = [type]
## 'mem' command
cmd-mem-desc = Imprime informações de memória gerenciada
cmd-mem-help = Uso: mem
cmd-mem-report = Tamanho da pilha: { TOSTRING($heapSize, "N0") }
Total alocado: { TOSTRING($totalAllocated, "N0") }
## 'physics' command
cmd-physics-overlay = {$overlay} não é uma sobreposição reconhecida
## 'lsasm' command
cmd-lsasm-desc = Lista assemblies carregados por contexto de carregamento
cmd-lsasm-help = Uso: lsasm
## 'exec' command
cmd-exec-desc = Executa um arquivo de script dos dados de usuário graváveis do jogo
cmd-exec-help = Uso: exec <fileName>
Cada linha no arquivo é executada como um único comando, a menos que comece com um #
cmd-exec-arg-filename = <fileName>
## 'dump_net_comps' command
cmd-dump_net_comps-desc = Imprime a tabela de componentes em rede.
cmd-dump_net_comps-help = Uso: dump_net-comps
cmd-dump_net_comps-error-writeable = Registro ainda gravável, IDs de rede não foram gerados.
cmd-dump_net_comps-header = Registros de componentes em rede:
## 'dump_event_tables' command
cmd-dump_event_tables-desc = Imprime tabelas de eventos direcionados para uma entidade.
// Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
public void TestTypeNobodyCanRead(TypeNobodyCanRead obj)
{
// None of these accesses should be allowed.
var copy = Data;
var copy2 = this.Data;
var copy3 = obj.Data;
copy = Data;
copy = this.Data;
copy = obj.Data;
var copy4 = Data.MyField;
var copy5 = this.Data.MyField;
var copy6 = obj.Data.MyField;
if (Data == copy) {}
if (this.Data == copy) {}
if (obj.Data == copy) {}
if(Data.MyField == 0) {}
if(this.Data.MyField == 0) {}
if(obj.Data.MyField == 0) {}
// All of these accesses should be fine.
var copy7 = Data2;
var copy8 = this.Data2;
var copy9 = obj.Data2;
copy = Data2;
copy = this.Data2;
copy = obj.Data2;
var copy10 = Data2.MyField;
var copy11 = this.Data2.MyField;
var copy12 = obj.Data2.MyField;
if (Data2 == copy) {}
if (this.Data2 == copy) {}
if (obj.Data2 == copy) {}
if(Data2.MyField == 0) {}
if(this.Data2.MyField == 0) {}
if(obj.Data2.MyField == 0) {}
}
}
[Access(typeof(FriendlyClass),
Self = AccessPermissions.Read,
Friend = AccessPermissions.Read,
Other = AccessPermissions.Read)]
public sealed class MemberNobodyCanRead
{
[Access(typeof(FriendlyClass),
Self = AccessPermissions.None,
Friend = AccessPermissions.None,
Other = AccessPermissions.None)]
public MyData Data = default;
public MyData Data2 = default;
public void TestMemberNobodyCanRead(TypeNobodyCanRead obj)
{
// None of these accesses should be allowed.
var copy = Data;
var copy2 = this.Data;
var copy3 = obj.Data;
copy = Data;
copy = this.Data;
copy = obj.Data;
var copy4 = Data.MyField;
var copy5 = this.Data.MyField;
var copy6 = obj.Data.MyField;
if (Data == copy) {}
if (this.Data == copy) {}
if (obj.Data == copy) {}
if(Data.MyField == 0) {}
if(this.Data.MyField == 0) {}
if(obj.Data.MyField == 0) {}
// All of these accesses should be fine.
var copy7 = Data2;
var copy8 = this.Data2;
var copy9 = obj.Data2;
copy = Data2;
copy = this.Data2;
copy = obj.Data2;
var copy10 = Data2.MyField;
var copy11 = this.Data2.MyField;
var copy12 = obj.Data2.MyField;
if (Data2 == copy) {}
if (this.Data2 == copy) {}
if (obj.Data2 == copy) {}
if(Data2.MyField == 0) {}
if(this.Data2.MyField == 0) {}
if(obj.Data2.MyField == 0) {}
}
}
public sealed class FriendlyClass
{
public void TestTypeNobodyCanRead(TypeNobodyCanRead obj)
{
// We shouldn't be able to access any of these, even if we're a friend..
var copy = obj.Data;
copy = obj.Data;
var copy2 = obj.Data.MyField;
copy2 = obj.Data.MyField;
if (obj.Data == copy) {}
if(obj.Data.MyField == 0) {}
// We should be allowed to access all of these, we're friends!
var copy3 = obj.Data2;
copy = obj.Data2;
var copy4 = obj.Data2.MyField;
copy4 = obj.Data2.MyField;
if(obj.Data2 == copy) {}
if(obj.Data2.MyField == 0) {}
}
public void TestMemberNobodyCanRead(MemberNobodyCanRead obj)
{
// We shouldn't be able to access any of these, even if we're a friend..
var copy = obj.Data;
copy = obj.Data;
var copy2 = obj.Data.MyField;
copy2 = obj.Data.MyField;
if (obj.Data == copy) {}
if(obj.Data.MyField == 0) {}
// We should be allowed to access all of these, we're friends!
var copy3 = obj.Data2;
copy = obj.Data2;
var copy4 = obj.Data2.MyField;
copy4 = obj.Data2.MyField;
if(obj.Data2 == copy) {}
if(obj.Data2.MyField == 0) {}
}
}
public sealed class OtherClass
{
public void TestTypeNobodyCanRead(TypeNobodyCanRead obj)
{
// We shouldn't be able to access any of these, as 'other types' can't..
var copy = obj.Data;
copy = obj.Data;
var copy2 = obj.Data.MyField;
copy2 = obj.Data.MyField;
if (obj.Data == copy) {}
if(obj.Data.MyField == 0) {}
// We should be allowed to access all of these, they let others read it!
var copy3 = obj.Data2;
copy = obj.Data2;
var copy4 = obj.Data2.MyField;
copy4 = obj.Data2.MyField;
if(obj.Data2 == copy) {}
if(obj.Data2.MyField == 0) {}
}
public void TestMemberNobodyCanRead(MemberNobodyCanRead obj)
{
// We shouldn't be able to access any of these, as 'other types' can't..
var copy = obj.Data;
copy = obj.Data;
var copy2 = obj.Data.MyField;
copy2 = obj.Data.MyField;
if (obj.Data == copy) {}
if(obj.Data.MyField == 0) {}
// We should be allowed to access all of these, they let others read it!
var copy3 = obj.Data2;
copy = obj.Data2;
var copy4 = obj.Data2.MyField;
copy4 = obj.Data2.MyField;
if(obj.Data2 == copy) {}
if(obj.Data2.MyField == 0) {}
}
}";
awaitVerifier(code,
// AUTO-GENERATED DIAGNOSTICS BELOW //
// /0/Test0.cs(35,20): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(36,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(37,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(39,16): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(40,16): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(41,16): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(43,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(44,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(45,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(47,13): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(48,13): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(49,13): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(51,12): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(52,12): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(53,12): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(95,20): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(96,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(97,21): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(99,16): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(100,16): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(101,16): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(103,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(104,21): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(105,21): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(107,13): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(108,13): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(109,13): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(111,12): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(112,12): error RA0002: Tried to perform a 'Read' same-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(113,12): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(143,20): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(144,16): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(146,21): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(147,17): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(149,13): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(150,12): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(166,20): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(167,16): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(169,21): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(170,17): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(172,13): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(173,12): error RA0002: Tried to perform a 'Read' friend-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(192,20): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(193,16): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(195,21): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(196,17): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(198,13): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(199,12): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'TypeNobodyCanRead', despite having no access. Type Permissions: ---------
// /0/Test0.cs(215,20): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(216,16): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(218,21): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(219,17): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(221,13): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
// /0/Test0.cs(222,12): error RA0002: Tried to perform a 'Read' other-type access to member 'Data' in type 'MemberNobodyCanRead', despite having no access. Member Permissions: ---------
public void TestTypeNobodyCanWrite(TypeNobodyCanWrite obj)
{
// None of these accesses should be allowed.
Data = default;
this.Data = default;
obj.Data = default;
Data.MyField = 0;
this.Data.MyField = 0;
obj.Data.MyField = 0;
// All of these accesses should be fine.
Data2 = default;
this.Data2 = default;
obj.Data2 = default;
Data2.MyField = 0;
this.Data2.MyField = 0;
obj.Data2.MyField = 0;
}
}
[Access(typeof(FriendlyClass),
Self = AccessPermissions.Write,
Friend = AccessPermissions.Write,
Other = AccessPermissions.Write)]
public sealed class MemberNobodyCanWrite
{
[Access(typeof(FriendlyClass),
Self = AccessPermissions.None,
Friend = AccessPermissions.None,
Other = AccessPermissions.None)]
public MyData Data = default;
public MyData Data2 = default;
public void TestMemberNobodyCanWrite(TypeNobodyCanWrite obj)
{
// None of these accesses should be allowed.
Data = default;
this.Data = default;
obj.Data = default;
Data.MyField = 0;
this.Data.MyField = 0;
obj.Data.MyField = 0;
// All of these accesses should be fine.
Data2 = default;
this.Data2 = default;
obj.Data2 = default;
Data2.MyField = 0;
this.Data2.MyField = 0;
obj.Data2.MyField = 0;
}
}
public sealed class FriendlyClass
{
public void TestTypeNobodyCanWrite(TypeNobodyCanWrite obj)
{
// We shouldn't be able to access any of these, even if we're a friend..
obj.Data = default;
obj.Data.MyField = 0;
// We should be allowed to access all of these, we're friends!
obj.Data2 = default;
obj.Data2.MyField = 0;
}
public void TestMemberNobodyCanWrite(MemberNobodyCanWrite obj)
{
// We shouldn't be able to access any of these, even if we're a friend..
obj.Data = default;
obj.Data.MyField = 0;
// We should be allowed to access all of these, we're friends!
obj.Data2 = default;
obj.Data2.MyField = 0;
}
}
public sealed class OtherClass
{
public void TestTypeNobodyCanWrite(TypeNobodyCanWrite obj)
{
// We shouldn't be able to access any of these, as 'other types' can't..
obj.Data = default;
obj.Data.MyField = 0;
// We should be allowed to access all of these, they let others write!
obj.Data2 = default;
obj.Data2.MyField = 0;
}
public void TestMemberNobodyCanWrite(MemberNobodyCanWrite obj)
{
// We shouldn't be able to access any of these, as 'other types' can't..
obj.Data = default;
obj.Data.MyField = 0;
// We should be allowed to access all of these, they let others write!
obj.Data2 = default;
obj.Data2.MyField = 0;
}
}";
awaitVerifier(code,
// AUTO-GENERATED DIAGNOSTICS BELOW //
// /0/Test0.cs(34,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(35,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(36,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(38,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(39,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(40,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(70,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(71,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(72,9): error RA0002: Tried to perform a 'Write' other-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(74,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(75,9): error RA0002: Tried to perform a 'Write' same-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(76,9): error RA0002: Tried to perform a 'Write' other-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(94,9): error RA0002: Tried to perform a 'Write' friend-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(95,9): error RA0002: Tried to perform a 'Write' friend-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(105,9): error RA0002: Tried to perform a 'Write' friend-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(106,9): error RA0002: Tried to perform a 'Write' friend-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(119,9): error RA0002: Tried to perform a 'Write' other-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(120,9): error RA0002: Tried to perform a 'Write' other-type access to member 'Data' in type 'TypeNobodyCanWrite', despite having no access. Type Permissions: ---------
// /0/Test0.cs(130,9): error RA0002: Tried to perform a 'Write' other-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
// /0/Test0.cs(131,9): error RA0002: Tried to perform a 'Write' other-type access to member 'Data' in type 'MemberNobodyCanWrite', despite having no access. Member Permissions: ---------
public void TestTypeNobodyCanExecute(TypeNobodyCanExecute obj)
{
// None of these accesses should be allowed.
MyMethod();
this.MyMethod();
obj.MyMethod();
Data.MyMethod();
this.Data.MyMethod();
obj.Data.MyMethod();
Data.MyField.ToString();
this.Data.MyField.ToString();
obj.Data.MyField.ToString();
// All of these accesses should be fine.
MyMethod2();
this.MyMethod2();
obj.MyMethod2();
Data2.MyMethod();
this.Data2.MyMethod();
obj.Data2.MyMethod();
Data2.MyField.ToString();
this.Data2.ToString();
obj.Data2.ToString();
}
}
[Access(typeof(FriendlyClass),
Self = AccessPermissions.Execute,
Friend = AccessPermissions.Execute,
Other = AccessPermissions.Execute)]
public sealed class MemberNobodyCanExecute
{
[Access(typeof(FriendlyClass),
Self = AccessPermissions.None,
Friend = AccessPermissions.None,
Other = AccessPermissions.None)]
public MyData Data = default;
public MyData Data2 = default;
[Access(typeof(FriendlyClass),
Self = AccessPermissions.None,
Friend = AccessPermissions.None,
Other = AccessPermissions.None)]
public void MyMethod() {}
public void MyMethod2() {}
public void TestMemberNobodyCanExecute(TypeNobodyCanExecute obj)
{
// None of these accesses should be allowed.
MyMethod();
this.MyMethod();
obj.MyMethod();
Data.MyMethod();
this.Data.MyMethod();
obj.Data.MyMethod();
Data.MyField.ToString();
this.Data.MyField.ToString();
obj.Data.MyField.ToString();
// All of these accesses should be fine.
MyMethod2();
this.MyMethod2();
obj.MyMethod2();
Data2.MyMethod();
this.Data2.MyMethod();
obj.Data2.MyMethod();
Data2.MyField.ToString();
this.Data2.ToString();
obj.Data2.ToString();
}
}
public sealed class FriendlyClass
{
public void TestTypeNobodyCanExecute(TypeNobodyCanExecute obj)
{
// We shouldn't be able to access any of these, even if we're a friend..
obj.MyMethod();
obj.Data.MyMethod();
obj.Data.MyField.ToString();
// We should be allowed to access all of these, we're friends!
obj.MyMethod2();
obj.Data2.MyMethod();
obj.Data2.MyField.ToString();
}
public void TestMemberNobodyCanExecute(MemberNobodyCanExecute obj)
{
// We shouldn't be able to access any of these, even if we're a friend..
obj.MyMethod();
obj.Data.MyMethod();
obj.Data.MyField.ToString();
// We should be allowed to access all of these, we're friends!
obj.MyMethod2();
obj.Data2.MyMethod();
obj.Data2.MyField.ToString();
}
}
public sealed class OtherClass
{
public void TestTypeNobodyCanExecute(TypeNobodyCanExecute obj)
{
// We shouldn't be able to access any of these, as 'other types' can't..
obj.MyMethod();
obj.Data.MyMethod();
obj.Data.MyField.ToString();
// We should be allowed to access all of these, they let others Execute!
obj.MyMethod2();
obj.Data2.MyMethod();
obj.Data2.MyField.ToString();
}
public void TestMemberNobodyCanExecute(MemberNobodyCanExecute obj)
{
// We shouldn't be able to access any of these, as 'other types' can't..
obj.MyMethod();
obj.Data.MyMethod();
obj.Data.MyField.ToString();
// We should be allowed to access all of these, they let others Execute!
obj.MyMethod2();
obj.Data2.MyMethod();
obj.Data2.MyField.ToString();
}
}";
awaitVerifier(code,
// AUTO-GENERATED DIAGNOSTICS BELOW //
// /0/Test0.cs(44,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'MyMethod' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(45,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'MyMethod' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(46,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'MyMethod' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(48,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(49,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(50,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(52,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(53,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(54,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(96,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'MyMethod' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(97,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'MyMethod' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(98,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'MyMethod' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(100,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(101,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(102,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(104,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(105,9): error RA0002: Tried to perform an 'Execute' same-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(106,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(128,9): error RA0002: Tried to perform an 'Execute' friend-type access to member 'MyMethod' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(129,9): error RA0002: Tried to perform an 'Execute' friend-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(130,9): error RA0002: Tried to perform an 'Execute' friend-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(141,9): error RA0002: Tried to perform an 'Execute' friend-type access to member 'MyMethod' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(142,9): error RA0002: Tried to perform an 'Execute' friend-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(143,9): error RA0002: Tried to perform an 'Execute' friend-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(157,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'MyMethod' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(158,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(159,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'Data' in type 'TypeNobodyCanExecute', despite having no access. Type Permissions: ---------
// /0/Test0.cs(170,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'MyMethod' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(171,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
// /0/Test0.cs(172,9): error RA0002: Tried to perform an 'Execute' other-type access to member 'Data' in type 'MemberNobodyCanExecute', despite having no access. Member Permissions: ---------
"Generic variant provided mismatches the amount of type parameters of non-generic variant",
"Usage",
DiagnosticSeverity.Error,
true,
"The non-generic variant should have at least as many type parameter at the beginning of the method as there are generic type parameters on the generic variant.");
"Accessing Task<T>.Result is dangerous and can cause deadlocks in some contexts. If you understand how this works and are certain that you aren't causing a deadlock here, mute this error with #pragma.",
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
