* ci : run test-backend-ops as a dedicated gg test
Run test-backend-ops as a separate gg test in ci/run.sh so it is executed outside ctest. With GG_BUILD_HIGH_PERF it keeps the existing CPU-only invocation (-b CPU); otherwise it runs all available backends without a backend filter.
Remove the dedicated backend-ops workflow and keep test-backend-ops as a built target that is not registered with ctest to avoid duplicate runs.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* ci : run test-backend-ops earlier and enable high-perf on kleidiai
Move the test-backend-ops gg test before test-llama-archs.
Enable GG_BUILD_HIGH_PERF and LLAMA_ARG_THREADS on the Graviton4 KleidiAI job and use the standard self-hosted results/mnt paths.
Add TODO markers for decoupling tests from libllama.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* ci : run test-backend-ops in parallel
Pass -j $(nproc) to test-backend-ops in both high-perf and all-backend modes.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* ci : disable parallel tests for ROCm
* cont : disable parallel tests with MoltenVK
* metal : rework fusion patterns into a single table
All fusable op patterns for the Metal backend are now declared once in a
fusion table (ggml-metal-fuse.cpp) and consumed by both the graph optimizer
(ggml_metal_fuse_max, packing) and the op encoders (ggml_metal_fuse_next,
compute). The two phases share the same pattern table plus ggml_can_fuse_subgraph_ext
for the structural checks, and differ only in the mode used for the pattern
check (STRUCTURAL at optimize time, since tensors are not allocated yet, and
FULL at compute time, including Metal buffer placement). This also protects the
snake activation (MUL + SIN + SQR + MUL + ADD) from being reordered during graph
optimization, which was previously unprotected.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : fix absolute output indices in fusion patterns
ggml_can_fuse_subgraph_ext expects the outputs array to contain absolute graph
node indices (it indexes cgraph->nodes[outputs[i]]), but the fusion table query
was passing a relative index (n_ops - 1). As a result the last node of every
pattern was not recognized as an output and was subjected to the elidable
use-count check, which failed for essentially all fusions. This silently
disabled the norm/MUL fusion and caused a ~5% token-generation regression.
Pass the absolute graph index of the last node instead.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : fuse gated_delta_net with cache cpy
Add GGML_METAL_FUSE_GDN_CACHE to the fusion table: when the gated_delta_net
kernel is followed by a cpy that scatters its recurrent state snapshots into
the KV cache, the kernel writes the snapshots straight into the cache buffer
and the trailing cpy is elided.
The gdn output has other consumers (the attn scores view), so unlike the
elision-chain patterns this is not a simple chain: a 'raw' flag on the fusion
pattern skips the generic chain/shape and ggml_can_fuse_subgraph_ext checks,
making the pattern-specific check callback the sole validator. Packing
(ggml_metal_fuse_max) now matches on the same view-transparent node sequence
that the compute phase uses, so the gdn + cache cpy group is packed along with
any intermediate views and stays adjacent through the reorder.
The fused cpy is a view consumer of the gdn (it writes the cache directly),
so its mem-range is skipped in the encoder; the skip is restricted to CPY
nodes consuming the previous fused node through a view so other fusions are
unaffected.
Add test_gated_delta_net_cache_fusion and register 5 cases.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : drop is_view_consumer mem-range skip
The is_view_consumer skip was carried over from the upstream gated_delta_net
cache-fusion draft, but it is not needed: keeping the elided cpy's mem-range in
the concurrency tracker only ever adds a (conservative) memory barrier at the
fusion point. It can never remove a barrier, so it cannot introduce a race. The
worst case is one spurious barrier per gdn+cache-cpy fusion, which is within
run-to-run noise on Qwen3.5-0.8B Q8_0.
Dropping the check keeps the mem-range loop uniform for all fused groups.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : rename gated_delta_net fused state output args
Rename the fused cache-write kernel argument to match the rest of the kargs:
state_out_stride -> nb_out (and widen it to uint64_t), and the local buffer id
bid_state_out -> bid_out.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : rename raw fusion flag to unsafe
raw did not convey that the flag opts a fusion pattern out of the generic
elision-chain safety net (ggml_can_fuse_subgraph_ext + chain/shape checks).
rename it to 'unsafe' to make explicit that the pattern's check callback is the
sole validator and must re-establish the safety guarantees itself.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : tidy fusion pattern checks and table
- const-correct ggml_metal_fuse_outputs buffer
- annotate unused check-callback parameters
- drop a redundant size_t cast
- align the ops/table initializers and add blank-line separation
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* metal : add generic fusion stats via ad-hoc proc-address API
Add a device-owned fusion context that lets a test tool count how many
times each fusion pattern fires and toggle fusion. It is exposed through
the ad-hoc ggml_backend_reg_get_proc_address mechanism with generic names
so the testing tool is backend-agnostic:
- ggml_backend_fusion_stats_init: start collecting fusion stats; when a
context is created afterwards it registers the labels/counters and
encodes single-threaded (n_cb == 0) so the counters are race-free
- ggml_backend_fusion_stats_reset / _get_stats / _set_enabled
The context lives on the metal device (not on the last backend context),
so counters accumulate across contexts and reads are always consistent.
The enable/disable toggle is initialized from GGML_METAL_FUSION_DISABLE
and can be overridden by the test through set_enabled. Labels are
synthesized from the fuse table via ggml_metal_fuse_label (e.g.
"GATED_DELTA_NET+CPY").
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : add fusion count regression test with per-backend baseline
test-fusion runs every dummy model generated by test-llama-archs on a
single backend (single-threaded encoding, n_cb == 0) with fusion enabled
and disabled, and for each mode (prefill / decode) reports the per-fusion
counters and the NMSE between the fused and unfused logits, plus the NMSE
against a CPU reference.
A fusion pattern that silently stops matching (or fires when it should
not) is caught as a regression by comparing the counters against a
committed per-backend TSV baseline:
- --record writes the golden baseline, --check (default) validates it
- the unfused run doubles as a control: its counters must be all-zero
- NMSE is skipped when it is NaN or the arch is already broken on the
device (e.g. plamo2 on Metal), so the count check is the hard gate
- baseline counts depend only on graph structure, not weights (verified
stable across weight seeds)
- the fusion stats API is resolved through the ad-hoc get_proc_address
mechanism with generic names; a backend that does not export it makes
the test fail with an error
The committed MTL0.tsv baseline covers 110 dummy archs (298 rows).
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : rename fusion api helpers to match stats_init signature
Align the test with the ad-hoc fusion stats API: fusion_stats_init no
longer takes an enable bool (stats are turned on by calling it), so the
proc-address wrappers and typedefs are renamed to the api_* convention.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : rename backend to device in fusion test CLI
The fusion test operates on a compute device (e.g. MTL0), not a backend,
so rename the --backend argument to --device and the backend_name
variable to device_name. Keep "backend" where it refers to the ggml
backend interface (the ad-hoc proc-address mechanism).
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : add --model and --help to fusion test
--model FILE runs the fusion regression test over a single model file
instead of enumerating a --models DIR. --models and --model are mutually
exclusive. Also add a --help/-h option that prints the usage.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : use backend base name for fusion baseline output
The fusion test is invoked with a specific device name (e.g. MTL0), but
its output - the recorded baseline and the header it writes - should be
named after the backend base name (e.g. MTL, via ggml_backend_reg_name),
since the counters depend on the backend, not on the specific device
index. Rename the committed baseline to MTL.tsv.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : run fusion test from ci instead of ctest
The fusion test needs Metal and generates a lot of dummy models, so it
does not belong in the generic ctest suite. Move it to ci/run.sh as
gg_run_test_fusion, gated on GG_BUILD_METAL like
gg_run_test_llama_archs_tensor_split: it generates the dummy models with
test-llama-archs -o and then validates the fusion counts against the
committed baseline. test-fusion.cpp is still built (llama_build) but no
longer registered as a ctest.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : align fusion baseline TSV columns
Pad the TSV fields to fixed widths so the columns line up regardless of
the variable arch and fusion-label lengths, and trim each field on parse
so the padded file is still accepted. Regenerate the committed MTL.tsv
baseline in the padded format (data unchanged, verified identical modulo
padding).
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : widen label column and align fusion TSV header
Give the label column more room (28 chars) and fix the column header
widths so they match the data rows (moe/mode/label), keeping the header
aligned with the values. Regenerate the MTL.tsv baseline in the new
format (data unchanged).
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : switch fusion baseline from TSV to CSV
Use comma-separated values like the rest of the project, keeping the
padded, aligned columns. Split on ',' and trim on parse. Rename the
committed baseline to MTL.csv (data unchanged, verified identical modulo
padding/separator). Update the ci/run.sh check path accordingly.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* cont : rebase + update MTL stats
* tests : avoid graph reallocations for some archs
* metal : tidy fusion debugging context and op init
- simplify the shared fusion debugging context comments
- shorten the ggml_metal_fusion struct comment
- align the ggml_metal_fuse struct fields and comments
- move the fusion parameter of ggml_metal_op_init right after dev
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : dedup fusion baseline into any mode
prefill and decode always produce the same per-graph fusion count, so
store a single row per label with mode = "any" and the per-graph count
instead of two rows. this halves the baseline size and keeps the check
stable.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* ci : move fusion model generation to a separate step
the dummy models generated by test-llama-archs are reused by other tests,
so generate them once in their own step instead of inside test_fusion.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : bump nmse thold
* models : fix plamo2 graph
* tests : remove "skip" logic from test-fusion
* tests : set qwen3tts dummy vocab to codec head size
the dummy qwen3tts model used a vocab of 4096 while the codec head is
3072, so the graph padded the output with -inf which made the NMSE in
test-fusion produce NaN. use the exact codec head size instead so the
padding is not generated at all.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* tests : regen fusion baseline
reflect the plamo2 graph fix, which changed its fusion pattern split
(RMS_NORM+MUL 11->10, RMS_NORM+MUL+ADD 3->4; same total).
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* ci : skip dummy model generation on OpenVINO
test-llama-archs does not build on the OpenVINO platform, so do not try
to generate the dummy models there.
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-0731
* cont : minor
* tests : enable test-llama-archs on windows
* cont : disable on windows + workaround
* metal : naming nits
* test-fusion : add instructions to update baseline
* context : fix Kimi-K3 graph reserve
* fusion : update MTL
* cont : fix naming
* metal : rework fusion info storage
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* metal : align fusion info API
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* metal : use opaque fusion handle in ad-hoc API
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* ci : move fusion test to dedicated workflow
Assisted-by: pi:llama.cpp/DeepSeek-V4-Flash-Vision-Exp
* cont : run only on ggml changes
* cont : simplify
* fusion : remove multi-output stuff for now
* ci : fix typo
* ci : add PYTEST_WORKERS=1 to fix server-self-hosted job
This commit adds the `PYTEST_WORKERS=1` environment variable to the
hf-jobs-t4-small:cuda13 runner steps.
This is an attempt to address CI failure of this job that I might have
introduced in Commit 42f0225fea
("server : use pytest-xdist for server tests (#28298)").
Refs: https://github.com/ggml-org/llama.cpp/actions/runs/34126971262/job/101757819134
* apply same changes to server-metal steps
This commit contains a suggestion for handling container images which
are currently not semver tagged, they only have build numbers in there
tags.
The proposed solution here is to first add a check to make sure that
there are container images built for the build number of the release and
if not fail the build. The container images are build nightly but they
can be triggered manually as well.
If the the container images check passes then the make-release workflow
will re-tag the images with the semver.
* server : use pytest-xdist for server tests
This commit adds pytest-xdist to the server tests. This is pytest
plugin that distributes test execution across multiple CPU cores.
Assisted-by: pi:llama.cpp/qwen3.8-27B
Refs: https://github.com/ggml-org/llama.cpp/pull/26734#issuecomment-5220707042
* remove server_base_port and BASE_PORT
* use worksteal and pytest builting tmp_path
* OpenVINO Backend: Fuse IM2COL + MatMul convolution into OpenVINO convolution
* ci:ggml-ov: Skip recurrent state rollback tests
* ci:ggml-ov: Skip recurrent state rollback tests
* Update OPENVINO.md
* ggml-openvino : add env-var gated op support debugging
* Fix ggml_rope_set_offset case
* OpenVINO backend: Support Whisper.cpp
* Fix code style
* openvino : enable qwen35 on NPU
Static shapes:
- get_graph_input_shape() left the s_copy / s_copy-leaf inputs dynamic
([1,1,1,-1]) even in static mode, which propagated a dynamic slot dim through
GET_ROWS into the conv/GDN state, the state reshapes and the GDN output.
- With -np 1 the s_copy defrag remainder gathers zero rows; short-circuit that
CPY to the untouched cache instead of emitting a degenerate Slice/Concat, and
skip binding its zero-byte ggml tensor as an output (the dynamic path already
did the latter, the static path wrote the full cache over a 0-byte buffer).
Token-count independence:
- In static mode the compiled model's token count is the prefill chunk size or
1, not the captured cgraph's. Offsets derived from the captured count were
therefore wrong. Anchor the GDN state slice at the end of the packed
[attn | state] output and drop the rs_src_begin runtime inputs, and make
VIEWs over the GDN output / conv_input pass through so the consumer does the
slicing.
- CONT could not identify its token axis when the graph was captured with a
single token (every trailing dim has the same stride and size 1) and baked
the captured shape into the prefill model.
Chunked prefill:
- The last chunk is padded with fabricated tokens. Attention masks them, but
the recurrent path folded them into cache_r/cache_s permanently. Add a
chunk_valid_len runtime input, use it to zero g and beta for padded steps
(making the recurrence an exact identity) and to end the conv snapshot window
at the last valid token, and disable the recurrent-cache reset after the
first chunk so earlier chunks are not wiped.
- get_is_prefill() and the chunk loop bound read inp_pos->ne[0] directly, but
IMROPE stacks 4 position planes, so every decode step was run through the
padded prefill model and the loop ran extra out-of-bounds chunks.
cache_rs_reset_idx/len now stay runtime Parameters in static mode, since
can_reuse_statically() does not invalidate the cached model on ComputeParams
changes. Add GGML_OPENVINO_FORCE_STATIC to exercise the static path on CPU.
* Update to OpenVINO 2026.3.1
* ggml-openvino: forward NPU compilation mode parameters
Add GGML_OPENVINO_NPU_COMPILE_CONFIG to the backend's cached environment so callers can configure the NPU compiler without using the generic property escape hatch.
When the value is non-empty, pass it to OpenVINO as NPU_COMPILATION_MODE_PARAMS. This enables settings such as optimization-level=3 for NPU compilation while preserving the existing behavior when the variable is unset and leaving CPU and GPU configuration unchanged.
Document the variable, its NPU-only scope, and the optimization-level=3 example in the OpenVINO backend runtime configuration table.
* ggml-openvino : support RELU, POOL_2D, QUICK_GEGLU, and ROLL ops
* reorder op table
* exclude GPU/NPU failing POOL_2D case
* move op type detection to compute_op_case
* Relax rope supported cases
* Fix pool case
* Update openvino doc, gpu driver in ov docker
* openvino: remove unused static remote context branch
* openvino: parallelize static model build
* Apply editorconfig
---------
Co-authored-by: Mostafa Faheem <mostafaaafaheem@gmail.com>
Co-authored-by: Ravi Panchumarthy <ravi.panchumarthy@intel.com>
Co-authored-by: zhaixuejun1993 <xuejun.zhai@intel.com>
* ci : inline UI version resolution into ui-build.yml
* ci : build UI once and reuse the artifact in release jobs
Server jobs now extract the ui-build artifact into tools/ui/dist instead of npm-building the UI. Also removes the get-version job and the no-op -DHF_UI_VERSION flags.
Assisted-by: pi:Kimi-K3
* ui : disable the npm UI build by default (LLAMA_BUILD_UI=OFF)
The flag now only controls building the UI from source via npm. The UI
is still embedded by default from local tools/ui/dist or the prebuilt
download (LLAMA_USE_PREBUILT_UI=ON). CI jobs no longer npm-build the
UI; server-sanitize does not need node anymore.
Assisted-by: pi:Kimi-K3
* ci : rename the ui-build artifact to llama-ui.zip
Consistent with the other artifact names in the Actions summary.
Assisted-by: pi:Kimi-K3
* ci : clarify the windows artifact merge in release.yml
The windows-cuda/vulkan/sycl jobs build only the backend library;
llama-server (with the embedded UI) is injected into their zips from
the windows-cpu package during the release. State this in the job
comments and use accurate wording in the merge step.
Assisted-by: pi:Kimi-K3
* rpc: support apple RDMA as an RPC transport
* remove set_tensor micro optimization, rpc socket pinning per CR
* remove transparent reconnect
* trigger apple builds on RPC changes
---------
Co-authored-by: Ryan Churaman <rschu@meta.com>
* add ccache-buckets action
* use ccache-buckets
* only save on master
* install python3-venv for hip
* add jq and python3 for cuda
* only delete caches older than 5 minutes
* ci : apply ccache-clear with older/min/dry-run to all ccache jobs
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : install gh in ccache-clear if missing (container jobs)
The ccache-clear action relies on the gh CLI, which is not present in
container-based jobs. Install it on demand so those jobs can clear caches.
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : install gh via apt repo in ccache-clear
The install.sh script used previously is no longer served (404). Switch to
the official GitHub CLI apt repository, which is still available.
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : pass --repo to gh cache commands in ccache-clear
In container jobs gh cannot auto-detect the repository from git, so
gh cache list/delete fail with 'failed to run git: not a git repository'.
Pass the repository explicitly via --repo using GITHUB_REPOSITORY.
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : drop -new suffix from vulkan ccache key
The -new suffix was only needed to force a fresh cache. With
ccache-clear now evicting stale caches, the original key can be used
again. The old ccache-vulkan-ubuntu-24.04-arm-new entries still match
the ccache-clear key prefix and are cleaned up automatically.
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : fix ccache-clear date parsing on macOS (BSD date)
macOS ships BSD date, which has no -d option. The older cutoff check
was silently disabled there: 'date: illegal option -- d' errors in the
log and the loop was only stopped by the min limit, risking deletion
of caches not older than the cutoff (e.g. saved by a concurrent job).
Parse the ISO-8601 timestamps with GNU date when available and fall
back to BSD date otherwise (TZ=UTC, fractional seconds dropped).
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : extract ccache-clear logic into scripts/ccache-clear.sh
The composite action now consists of a dedicated step that installs the
GitHub CLI when missing (e.g. in container jobs) and a thin step that
calls the new script. The script follows the make-release-checks.sh
conventions (usage/env header, set -euo pipefail, CLI flags) and only
checks that gh is available. The action inputs are unchanged, so the
workflow steps are untouched.
Assisted-by: llama.cpp:DeepSeek-v4-Flash-0731
* ci : remove unused apple ccaches
* Revert "ci : disable ubuntu-rocm (#26969)"
This reverts commit 9558fa44c9.
* ci: set ccache compiler_check=content for ROCm build
The ROCm toolchain is pip-installed fresh on every run, so the clang binary's
mtime changes each time. With ccache's default compiler_check=mtime that
invalidates the whole cache and warm builds only reached ~70% hits. Hash the
compiler contents instead so the cache survives toolchain reinstalls.
* Update ccache size to 1GB
We're waivering with so many architectures built, we need a bigger
ccache limit.
* merge fix
---------
Co-authored-by: Jim Wu <ywu@xilinx.com>
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
* ci : add older, min and dry-run options to ccache-clear
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* pi : add note about not wrapping lines in PR descriptions
[no ci]
Assisted-by: pi:llama.cpp/Qwen3.8-27B
The 'Create release' step had no id, so steps.create_release.outputs.id
resolved to an empty string in the 'Upload nightly-tag.txt' step. The
uploadReleaseAsset call then hit /releases//assets and failed with HTTP
404 (Unhandled error: HttpError), e.g. run 32513839499.
Add id: create_release to the step; the action already exposes the id
output.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* ci : run ccache-clear as the last step of release jobs
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* update disabled job too to force rebase
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
As agreed in ggml discussion #1579, the official semver releases now
include a nightly-tag.txt asset containing the tag of the corresponding
nightly release (e.g. b10485). The Web UI assets are published to the
HF bucket under the nightly tag, so this makes them discoverable for
each official release.
- make-release-desc.sh: expose the resolved nightly tag as a
nightly_tag output
- make-release.yml: create nightly-tag.txt from that tag, upload it
as a release asset (skipped on dry-run), mention it in the release
body and in the dry-run summary
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* CI: Use LLVM's OpenMP over MSFT_DEBUG_non_redist on Windows
Currently, we ship the non-redist debug version of microsoft's libomp.
This PR changes this to official LLVM's release, also packaging
the license as needed.
* Remove LLVM SHA from job name to increase legibility
* Add temp validations to CI
* Revert "Add temp validations to CI"
This reverts commit eef97c88b5.
* Build OpenMP in CI
* Make OpenMP fetch self-contained in cmake and cache in CI
* Robustify Licens-packaging
1. Ship OpenMP license, not LLVM's.
2. Invalidate cache also on checksum of the license
* Remove stale reference in docs/build.md
* No longer package base license in release
This was scope-creep
* Add explanatory comment to OpenMP license
* Remove arm64 smoke
Forgot this during conflict resolution during rebase of
c54c0e9cf6
* Remove GGML_OPENMP_FETCH_CACHE_DIR as requested by @CISC
* whitespace changes
* update to ov-2026.3, update device drivers
* ci: skip nemotron-h rollback test on OpenVINO
The OpenVINO backend does not support SSM_SCAN, so the Nemotron-H recurrent state rollback graph is split and cannot preserve the recurrent cache output shape. Keep the test enabled for other backends and retain the qwen35 OpenVINO rollback coverage.
---------
Co-authored-by: ravi9 <ravi.panchumarthy@intel.com>
* ci : create pre-release with change log and nightly link in make-release
After pushing the tag, create a pre-release using
ggml-org/action-create-release. The release description is generated by
scripts/make-release-desc.sh: the change log between the current and
previous version (one line per commit), a link to the corresponding
nightly build when it exists, and a note that semantic versioning is
still work in progress.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* cmake : bump version to 0.1.2
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* ci : find the nightly tag by commit in make-release-desc.sh
The nightly release is guaranteed by the release checks to point at HEAD,
so instead of reconstructing its name (commit count, branch, hash) just
pick the b* tag pointing at HEAD. This also drops the RELEASE_BRANCH env
var from the workflow.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* ci : resolve the release commit from the version tag in make-release-desc.sh
The change log and nightly lookup now use the commit the version tag
points at (HEAD when the tag does not exist), instead of always HEAD.
This makes the script usable locally for older versions, e.g.
./scripts/make-release-desc.sh v0.1.1. The tag is resolved to a SHA
first, since --points-at does not peel annotated tags.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* ci : normalize the version argument in make-release-desc.sh
Accept the version with or without the leading v (0.1.1 == v0.1.1) and
reject anything else, instead of silently treating a bare version as a
non-existent tag name.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* cont : clean-up
Add a "Create and push git tag" step to the release job, right before
the "Create release" step. The tag is created with git tag and pushed
with the deploy key already configured by the Clone step, instead of
relying on the Releases API (action-create-release) to create it as a
side effect.
The tag is lightweight, matching all existing b<number> release tags.
The step is idempotent: if the tag already exists (e.g. on a re-run),
creation and push are skipped.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* ci : parallelize platform builds in build-xcframework.sh
The ios-xcode release job builds 7 platform/simulator configurations
sequentially, each with -j $(nproc). Run them with at most 3 concurrent
builds (the release runner has 3 cores), splitting the cores between the
builds (-j 1 each on the runner), so total CPU pressure is unchanged while
the build phase runs about 2.3x faster.
- convert the 7 build blocks into functions (flags unchanged)
- add a run_builds_parallel pool: 3-slot sliding window, per-build logs,
dumps the failing log and aborts on error (background job failures do
not trigger set -e)
- queue the 2-arch builds first so the slower builds occupy the slots early
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* pi : add guideline for comments
* cont : disable 5/7 builds
* ci : make build-xcframework.sh builds configurable via CLI args
The script now takes an optional list of builds to run
(ios-sim ios-device macos visionos visionos-sim tvos-sim tvos-device);
with no arguments it builds all of them, as before. The per-build
lists for the build pool, framework setup, static library combining
and xcframework creation are now driven by a single build_spec
lookup instead of four hardcoded (partially commented-out) lists.
release.yml builds only macos and ios-device to cut the build time.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* ci : allow make-release to target a specific commit
The make-release workflow now accepts an optional 'commit' input. When
set, that commit is checked out and the release checks verify that it
belongs to the branch selected in the "Run workflow" dialog and is not
older than 3 days from the branch tip. The check is part of
make-release-checks.sh (driven by the RELEASE_BRANCH env), so it follows
the same dry-run semantics as the other checks.
Assisted-by: pi:llama.cpp/Qwen3.8-27B
* cont : scan latest 100 relase workflow runs
* cont : do not check manually for release.yml success
* test address on Intel-LNL-U7-258V
* retry
* run address on github
* use native build for cpu
* this should be runnable everywhere multicore
* disable ccache
---------
Co-authored-by: Sigbjørn Skjæret <sigbjorn.skjaeret@huggingface.co>
